Guide:AI Customization

Overview

This guide will show how to install and customize AI.

Install Instructions

Kisaro's fork of AzzyAI will be used as an example since it's updated with 4th jobs: GitHub Link
Follow the instructions on his GitHub page . After finishing it, your USER_AI folder should look something like below.

Homunculus

General Suggestions

• To use this custom AI, go in game and type /hoai until chatbox says Homunculus has been customized.
• To configure AI settings, go into your computer's RO folder -> AI folder -> USER_AI folder and run AzzyAIConfig.exe

  

  • Note: After applying changes, relogging game character is enough to have changes take effect.

Passive Behavior

This will make your homunculus not attack unless you tell it to.

1. On your computer, open AzzyAIConfig.exe.
2. On the Homunculus tab, in Autobuff Options category, change UseOffensiveBuff to Never.

   

3. Then all the way down in Walk/Follow Options category, change SpawnDelay to higher number like 2000.

   

4. After all done, press Apply Settings.
5. Next go to Homunculus Tactics tab and copy the picture below:

   

6. Log/relog your character and see if changes take effect.

Aggressive Behavior

This will make your homunculus attack anything it sees.

1. On your computer, open AzzyAIConfig.exe.
2. On Homunculus Tactics tab set Basic Behavior to Attack (high) , then press Apply Settings at the bottom.
3. Log/relog your character and see if changes take effect.